MULTIBLADE SAWING MACHINE Mod.SMB/160.
Electronically controlled pump for belt lubrification. Assures perfect sloding and long life of the guides.
The toothe gearing allows almost total use of motor power (96%).
Hydraulic gearmotor to adjust the feeding speed displayed on the control panel.
Control panel of machine functions with diagnostic display.
Belt made up to spheroidal graphite cast iron sliding blocks. Feed by means of sliding on profiled resin guides guaranteeing maximum tow linearity.
Presser unit made up of 6 independent rollers with splinter guard system composed of 2 rows of anti-kickback steel wedges and 3 rows of splinter guards.
Treated and normalized steel cutter block suitable for supporting a high number of blades.
Centring index of saws units with regards to the cut depth.

Type Available:
- SMB/160, motor Hp.30+30
- SMB/160, motor Hp.40+40
- SMB/160, motor Hp.50+50
- SMB/160, motor Hp.60+60

Technical Data:
- Max depth of cut mm.160
- Min lenght of pieces mm.900
- Blòade holder diameter mm.70
- Feeding speed Mt/min.0-30
- Spindle shaft speed Rpm.3700
- Min diameter of circular saws mm.200
- Max diameter of circular saws mm.300
- Carpet width mm.320
- Max distance between exterior blades mm.300
- Main motors Hp.30+30 (Hp.40-50-60 x 2)
- Feeding motor controlled by inverter Hp.2
- Lifting motor Hp.1
- Work table dimensions mm.2550x700
- Shipping dimensions mm.2650x1900x1800 (h)
- Weight kg.4000
The machine can be equipped with motorised roller for pieces min lenght mm.700 on SMB/160.


MULTIBLADE SAWING MACHINE Mod.SMB/200.
Electronically controlled pump for belt lubrification. Assures perfect sloding and long life of the guides.
The toothe gearing allows almost total use of motor power (96%).
Hydraulic gearmotor to adjust the feeding speed displayed on the control panel.
Control panel of machine functions with diagnostic display.
Belt made up to spheroidal graphite cast iron sliding blocks. Feed by means of sliding on profiled resin guides guaranteeing maximum tow linearity.
Presser unit made up of 6 independent rollers with splinter guard system composed of 2 rows of anti-kickback steel wedges and 3 rows of splinter guards.
Treated and normalized steel cutter block suitable for supporting a high number of blades.
Centring index of saws units with regards to the cut depth.

Type Available:
- SMB/200, motor Hp.40+40
- SMB/200, motor Hp.50+50
- SMB/200, motor Hp.60+60
- SMB/200, motor Hp.75+75

Technical Data:
- Max depth of cut mm.200
- Min lenght of pieces mm.1000
- Blòade holder diameter mm.70
- Feeding speed Mt/min.0-30
- Spindle shaft speed Rpm.3400
- Min diameter of circular saws mm.250
- Max diameter of circular saws mm.350
- Carpet width mm.400
- Max distance between exterior blades mm.380
- Main motors Hp.40+40 (Hp.50-60-75 x 2)
- Feeding motor controlled by inverter Hp.2,5
- Lifting motor Hp.1
- Work table dimensions mm.2630x780
- Shipping dimensions mm.2650x1900x1800 (h)
- Weight kg.5000
The machine can be equipped with motorised roller for pieces min lenght mm.800 on SMB/200.